You can also use the +/- switches to increase or decrease the value of the number.
6-2 Press numeric keys 0-9 to select a new MIDI controller. You can select and assign 119 types of MIDI functions (1-31, 3395, 102-121, 128-132)Ħ-1 Press the WHEEL ASSIGN switch and the LED starts to flash showing the number of the present MIDI controller. Use the WHEEL to transmit MIDI CONTROL CHANGES. 5-2 To bend the sound down: Move the WHEEL towards you. This allows you to bend the pitch of a sound up (or down) to add expression to your performance.ĥ-1 To bend the sound up: Move the WHEEL away from you. Moving the PITCH BEND WHEEL transmits MIDI PITCH BEND messages to any connected equipment. This allows you to control the master volume of connected devices, e.g. Moving the MASTER VOLUME slider transmits MIDI VOLUME messages to connected equipment. * The default CHANNEL is 1 when power is turned on. Note: * if you do nothing after step 3-1 for about 5 seconds, the LED will return to show the present PROGRAM CHANGE number. 3-3 You can also use +/- switches to increase or decrease the value. The LED shows the present TRANSMIT channelģ-2 Press one (or two) of the numeric keys to change the channel.
Be sure to match the channel with the RECEIVE channel of any connected equipment.ģ-1 Press the CHANNEL switch. Once you have set the unit’s MIDI channel, the unit sends all MIDI messages on this MIDI channel. There are 16 MIDI transmit channels available. Note: Do not leave the adapter plugged in for long periods of time if the unit is not in use.Ģ-1 Connect the unit with other MIDI equipment you may have: You can also use an AC adapter with the following specification: 9-12V DC output, 250-300mA, centre positive. Use alkaline batteries for maximum performance. It is advisable to replace all 6 batteries at the same time and never mix batteries.
Insert new batteries making sure that the polarity is correct.ģ. Remove the battery compartment cover and take out the batteries.Ģ. Weak batteries will result in poor performance. This unit is powered by 6 “C” (R-14) size batteries.
0 kommentar(er)
